Automatic Cantilever Gate

The expert solution...

  • Cantilever automatic gate
  • Fast opening speed option available
  • Our most versatile gate with a broad range of options
  • Easy installation 
  • Ground templates available on request
Betafence guarantee 10 years pes

Technical Information

Bekamatic SC Specification


Large Range

The range is going from 3m opening width to up to 12m opening width. The possible heights are variable between 1m and 2.4m. Other sizes are available on request.


The Bekamatic SC gates are state of the art in terms of safety. All gates are equipped with 5 pressure strips, warning light, two pairs of photocells. The safety distance between the bars with Robusta infill is 110mm, to prevent climbing through. The roller system is integrated in the underbeam of the date and is also avaoiding accidents.

Complete System

The Bekamatic SC sliding gate can be easily combined with an attached pedestrian gate and with all common Betafence fencing systems.


Bekamatic SC sliding gates completely harmonise with all styles of architecture.

Operation Security

Bekamatic SC sliding gates are extremely rigid due to the chosen profile sections and the welded construction.

Tension System

Bekamatic SC sliding gates are foreseen with an ingenious tension system integrated in the frame of the gate. This tension system guarantees a perfect stable and in line operation at all times.


Bekamatic SC sliding gates are delivered completely pre-assembled on site, and ensure, in this way, a very quick and smooth installation on site.


  • Factories and workshops
  • Adminastrative centres
  • Public buildings
  • Play areas and sport grounds
  • Schools
  • Parks
  • Aiports
  • Military sites

Different Versions

The Bekamatic gate is always motorized and foreseen with the most advanced safety and security solutions. There are two different versions. For the two different versions, the motorization is completely integrated in the guiding post of the Bekamatic gate. In this way the motorization is also protected to all vandalism and weather conditions. In the same time the motor and controller are easily reachable for maintenance and interventions. In any case the perfect solution for the most intensive and extreme conditions.

  • Bekamatic SC 5000 line (with E145 controller) A version that is already existing for a long time and has proven his capabilities. A fixed opening speed of 9 m/min, all kind of access control options are possible.
  • Bekamatic sC 10000 line (with eP 104 controller) A version that is newly developed and is working with a frequency operated controller. If this version is chosen a variable opening speed to up to 18 m/min is possible. Off course all kind of access control options are possible.

Gate Wing

  • Welded structure
  • - Dental strip is optional (from height of 2 m onwards)
  • - The frame is provided at the top and the bottom with guiding rolls for a perfect entering in the end post bridge.
  • - Two roller sets integrated in the underbeam for vertical and horizontal guiding
  • - A roll to support the gate in open position - Safety distance of 110 mm between the bars (for Robusta infi ll)
  • - Robusta, Nylofor, Securifor or Lamella* infi ll are all possible.

* max. 6 cm free passage

Guidance of the gate

Guiding posts and end posts have ground plates.

  • - The guiding post has 2 adjustable guiding rolls at the top and an integrated base plate for the installation of 1 set of guiding rolls that is situated in the underbeam.
  • - The universal guiding post is being used for both Bekamatic gates with underbeam 2000 or underbeam 2800.

Lock post

The lock post has a gate catcher mounted on top of the lock post, and is always foreseen with base plates. Two different versions are existing : Enhanced post for combination with big access control options (intercom or videophone) and one version for basic or no access control options.

Tension System

The frame of the Bekamatic SC sliding gate features a carefully engineered tension system which assures perfect alignment of the underbeam at all times.

Coating Technique

Bekamatic gates are treated with the best coating techniques available: galvanised in- and outside (minimum 275 g/m2, 2 sides combined). Finally the gates are epoxy and polyester coated (min. 120 micron). We give 10 years guarantee on all our coatings.


Green RAL 6005, green RAL 6009, white RAL 9010, grey RAL 7030, grey RAL 7016, blue RAL 5010, black RAL 9005. Other colours: on request.

Installation kit

Installation kit
To help save time with your installation Betafence recommends that you purchase a full kit of drilling templates with your gate. Thanks to the drilling template kit, you'll be able to prepare your concrete base where guiding and reception posts will be placed, without any errors.  With your anchor positioned, you are ready to install your gate.

This kit is universal, applicable to Robusta SC & Bekamatic SC sliding gates. It includes elements for guiding posts, lock posts and rear roller set. It's light and durable, made out of black plexiglass.

Technical Details
  Underbeam R 200 Underbeam R 2800
Bekamatic SC 5000 Line 10 000 Line 500 Line 10 000 Line
Free Passage 3 to 9 m 8 to 12 m
Underbeam 200 x 160 x 5 mm 280 x 200 x 5 mm
Frame (horizontal) 80 x 60 x 3 mm 100 x 100 x 3 mm
Frame (vertical) 80 x 60 x 3 mm 100 x 80 x 3 mm
Infill (robusta) 25 x 25 mm 30 x 30 mm
Distance between bars 110 mm
Double sided giuding post 180 x 80 mm (outside) & 360 x 170 mm (inside cabinet)
Double sided lock post for access control 180 x 80 mm
Double sided lock post without access control

100 x100 mm

Optional infills

Nylofor (2D/2DS/F/3D/3DS) / Securifor/ Lamella's)


Select products you would like to include in your tender. Pay attention to select compatible Panels/Rolls & posts system. By clicking on "Generate your tenders" you'll receive a PDF document with detailed description.

Processing download, please wait..

If you want to add other products to your tender, you need to create a new configuration. You can manage this  on our Tender Tool  page.