ROBUSTA SR
Motorised or Manual Opening Sliding Gate

The design, construction and finish of our Robusta sliding gates results from years of practical experience from installations combined with Betafence's superior technological know how.

Colors:
Betafence guarantee 10 years pes

Technical Information

Robusta SR Specification

Benefits

Large range

There are two versions of canteliver sliding gate, the choice being determined by the size of the opening required. Types 2000 and 2800 can be equipped with an integrated Bekamatic motorisation. Type 2000 can also be motorised with Robusta Plus.

Safety

The distance between the vertical bars is 110mm, to prevent climbing through. Fitting the roller system in the underbean also avoids accidents.

Complete System

The cantilever sliding gate can easily be used in conjunction with Robuta swing gates and the Betafence fencing systems.

Harmony

Robusta gates completely harmonised with all styles of architecture.

Security of Operation

Robusta gates are extremely rigid due to their section and the welded construction.

Ingenious Tension System

An ingenious tension system is integrated in the frame of the cantilever sliding gates to guarantee a perfect line at all times.

Pre-assembled

Robusta cantilever sliding gates are fully pre-assembled at the factory to ensure a quick and smooth installation on site.

Guidance of the gate

  • Guiding posts and end posts with welded ground plates
  • The guiding posts have 2 guiding rolls at the top and an integrated base plate for the installation of 1 set of guiding rolls that is situated in the underbeam
  • Special guiding posts with integrated electronics are used for motorisation
  • The end post of the non motorised gates have a lock system integrated

Motorisation

Robusta plus motorised is possible through collaboration with FAAC. Easy installation and connection guaranteed.  Specific executions on demand. The integrated Bekamatic motorisation is available for the total range.

Tension System

The frame of the cantilever sliding gate features a carefully engineered tension system which assures perfect alignment of the underbean at all times.

Coating Technique

Robusta gates are treated with the best coating techniques available: galvanised in and outside (minimum 275 g/m2, 2 sides combined). Afetrwards an adhesion coating is applied (epoxy) and finally the gates are plastic coated (polyester) (min. 120 micron both layers together).

Colours

Green RAL 6005, green RAL 6009, other colours: on request.

 

 

  Robusta 2000 Robusta 2800
Free Passage 3 up to 9 m 8 up to 12 m
Underbeam 200 x 160 x 5 mm 280 x 200 x 5 mm
Frame 80 x 60 x 3 mm top side 100 x 100 x 3 mm top sie
Frame 80 x 60 x 3 mm vertical 100 x 80 x 3 mm vertical
Infill frame 25 x 25 x 1.5 mm  30 x 30 x 1.5 mm
Distance between bars 110 mm 110 mm
Guiding post manual

width x height (mm)

120 x 80 x 3 mm post bridge

120 x 120 x 3 mm for 8000 x 2000

120 x 120 x 3 mm for 9000 x 2000

100 x 100 x 3 mm post bridge
Guiding post motorised

Width x height (mm)

120 x 80 x 3 mm post bridge

120 x 120 x 3 mm for 8000 x 2000

120 x 120 x 3 mm for 9000 x 2000

with Bekamatic Motorisation inside post 120 x 80 x 3 mm outside post
Lock post manual 120 x 120 x 3 mm 120 x 120 x 3 mm
Support roll (open position) opening 5, 6 ,7,8 and 9 m all types

 


TOP